Facet Red Top High Delivery Fuel Pump Kit for Old Skool Rotaries inc RX-7 FB

Description Facet red top high delivery fuel pump. This pump will cope with the fuel needs of most carburettors and will usually not require a standalone fuel pressure regulators is used with the Nikki carburettor that is standard fit for the RX-7 FB An industry standard for over 60 years, these lightweight compact pumps can be found in almost every conceivable application. With output ranges up to 170.3 liters/hour, .68 bar, these pumps will provide high-performance output for everything from racing cars to heavy duty agricultural and construction machinery. E10 E85 Compatible. The stock Series 3 fuel pump is no longer available so this works as a great alternative replacement that will delivery your fuel needs on a stock or mildly modified engine. Contents 1x Pump (480532E) 2x 8mm 90 Degree Union (FPA9021B) 1x Facet Mounting Kit (FPA905) 1x Spare Filter (FPA908W) Specification Earth:- Neg Pressure (Psi):- 6.0-8.0 Length:-140mm Diameter:- 54mm As this is not an OEM pump it will not be a simple direct fit replacement for the stock pump, so some custom work may be needed to mount the pump in the stock location. We have found that this pump installs quite nicely on the chassis rail just behind the stock pump location, as the rail rises up along the back of the rear seat area. there you will find a pre existing M6 bolt hole that is not used, this will give you your first bolt down point, you then just need to drill the rail and tsp it to M6 (or install an M6 nutsert) This keeps it close to the stock location while also being clear of the road and rear axel movement. extension of the wiring and fuel hoses will also be required when installing in this location. Please note that as this pump is a high flow unit it will be noisier than the stock fuel pump, we recommend using the supplied rubber vibration isolators when installing the pump to reduce this noise where possible. Specification Earth:- Neg Pressure (Psi):- 6.0-8.0 Fuel:- Diesel/ Petrol Flow:- US Gallons/Hr 40 Dry Prime Height in Mtrs:- 40 Thread Size:- 1/4 npt Operating Temperature:- -40º to 180° F (all Models)